UM0857
Additional setup information
Doc ID 16752 Rev 1
35/66
6.3 LEDs
Both the smart monitoring station (STEVAL-IFS014V1) and smart monitoring node
(STEVAL-IFS015V1) have 5 different LEDs with the following description:
1.
PW (power LED - green) - this LED glows if the system is on
2.
CH (charging LED - orange) - this LED shows if the battery is charging. If the external
supply is available and the battery is charging, then this LED glows. When the battery
is fully charged or if the external supply is removed, this LED turns off
3.
D2 (alarm LED - red) - this LED glows whenever there is an error or alarm
4.
D1 (lamp LED - yellow) - this LED functions as the lamp which can be switched on or
off from the smart monitoring station by the user using the light application of the
system
5.
NW (network LED - blue) - this LED blinks whenever there is any communication using
ZigBee.
6.4 Battery
connection
In this section we explain how the user can connect the battery to the STEVAL-IFS014V1
and STEVAL-IFS015V1. Both the systems have been designed for the Li-Ion battery of the
dimensions 45 x 35 x 5 mm (see figure below). The battery dimensions are similar to the
battery with part number BL-5B from Nokia.
For the RTC power backup, a socket for the 3 V coin-type CR2032 battery is provided.
Figure 32.
Dimensions of Li-Ion battery
www.BDTIC.com/ST