Main window
UM2268
16/68
UM2268 Rev 6
Where:
•
XPC
: If supported by the Tag, the XPC value is displayed.
•
Tag Identifier
: The Tag TID information is displayed only if the protocol selection option
in the Reader Settings is switched to either:
–
Gen2 – N with TID
–
GB – 29768 with TID
•
Timestamp
: The last time the tag was inventoried relative to the start of the inventory
scan operation.
•
Read Count
: Number of inventories for this Tag
•
Tag Information
: AGC and I/Q values for this Tag
•
Input Power
: Either the linear or logarithmic RSSI value information for this Tag. The
values can be switched with the View menu
2.2 Inventory
Statistics
The Inventory Statistics give real time information of reader parameters and anti-collision
slot status during an active scan.
Figure 14. Inventory - Round info panel
Where:
•
Receiver Gain
: The current receiver gain. The receiver gain value may change when
adaptive sensitivity is enabled during scan
•
Frequency
: The current RF carrier frequency that is used. The RF carrier frequency
changes with the defined allocation time when frequency hopping is enabled.
