9
Synchronous errors and WIND messages
Synchronous errors
The following tables list the synchronous errors, each specified with its ID. The tables also show the errors that
are specific to an HTTP client connection. They are characterized by the prefix AT-S.
Table 10.
AT-S.ERROR:=ERROR ID= =ERROR String=
ERROR ID
ERROR string
1
"Command not found"
2
"Missing argument(s)"
3
Reserved
4
"Variable not found"
5
Reserved
6
"Too many argument(s)"
7
"Invalid argument(s)"
8
"Invalid value"
9
Reserved
10
Reserved
11
Reserved
12
Reserved
13
Reserved
14
Reserved
15
Reserved
16
"Cannot switch to Python shell"
17
"Radio enabled"
18
"Radio not running"
19
"Direction must be 'in' or 'out'"
20
"Invalid GPIO Num (0-15)"
21
"Cannot use GPIO6 when sleep_enabled"
22
"Cannot use interrupt. Reserved for WPS feature"
23
"Cannot use GPIO10 when blink_led"
24
"Cannot use when SPI"
25
"Interrupt line already set"
26
"Output voltage not allowed"
27
"Frequency not supported"
28
"Duty cycle not supported"
29
"PWM not running"
30
Reserved
31
Reserved
32
"Argument exceeds allowed size"
33
"Argument evaluated to zero"
UM2114
Synchronous errors and WIND messages
UM2114
-
Rev 3
page 50/66
