1
Overview
The several interfaces including Ethernet controller, CAN-FD, LIN and UART, ADC, and JTAG port make
the SPC584B-DISP an excellent tool to evaluate the microcontroller as well as to develop and then debug
applications.
An integrated programmer debugger (supported PLS) allows debugging and programming the microcontroller.
The same section allows enabling a USB virtual COM port.
Dedicated connectors allow plugging shields Arduino UNO R3-compatible. This feature makes it simple to
expand the board functionality adding a shield or board available on the market. All GPIOs and main signals
are accessible by a 4x37 0.1” pin array.
Figure 1.
SPC584B-DISP discovery board-top side
UM2462
Overview
UM2462
-
Rev 3
page 2/25
