In-home display GUI application
AN3311
40/58
Doc ID 18209 Rev 1
If you click on Management two situations are possible:
●
If no plug is connected to the smartplug coordinator, the following screen is shown:
Figure 16.
No plug detected
●
Once more plugs are detected, the following screen is shown:
Figure 17.
Plugs detected
There are three main buttons: identify, modify, and control. They allow to manage the
smartplug device.
The Identify button is useful to activate the LED flashing on the relative plug, so this way the
user can easily identify which plug they are going to manage through the GUI.
If Modify is clicked, the user can change the label of the selected plug, through the screen
shown in
, choosing the new label from a list contained in a combobox.
