4
AEK-LCD-DT028V1 sample application
4.1
How to create a simple AEK-LCD-DT028V1 sample application
This example allows you to create an application that asks to tap the "X" character on the screen and returns the
coordinates of the touched point.
Step 1.
Create a new SPC5-STUDIO application for the SPC58EC series microcontroller and add the following
components:
–
SPC58ECxx Init Package Component RLA
–
SPC58ECxx Low Level Drivers Component RLA
Note:
If these components are not added, the other components are not visible.
Step 2.
Add the following additional components:
–
AutoDevKit Init Package Component
–
SPC58ECxx Platform Component RLA
–
AEK-LCD-DT028V1 Component RLA
Figure 13.
SPC5-STUDIO - adding AEK-LCD-DT028V1 component
1. SPC58ECxx Platform Component RLA
2. Open available components
3. AEK-LCD-DT028V1 Component RLA
Step 3.
Select [
AEK-LCD-DT028V1 Component RLA
] to open the [
Application Configuration
] window.
UM2939
AEK-LCD-DT028V1 sample application
UM2939
-
Rev 1
page 12/28
