UM2032 Rev 3
37/40
UM2032 Federal Communications Commission (FCC) and ISED Canada Compliance Statements
39
8
Federal Communications Commission (FCC)
and ISED Canada Compliance Statements
8.1
FCC Compliance Statement
8.1.1 Part
15.19
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
8.1.2 Part
15.21
Any changes or modifications to this equipment not expressly approved by
STMicroelectronics may cause harmful interference and void the user's authority to operate
this equipment.
8.1.3 Part
15.105
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Responsible party (in the USA)
Terry Blanchard
Americas Region Legal | Group Vice President and Regional Legal Counsel, The Americas
STMicroelectronics, Inc.
750 Canyon Drive | Suite 300 | Coppell, Texas 75019
USA
Telephone: +1 972-466-7845
8.2
ISED Compliance Statement
Compliance Statement
ISED Canada ICES-003 Compliance Label:
CAN ICES-3 (A) / NMB-3 (A)
.
Déclaration de conformité
Étiquette de conformité à la NMB-003 d'ISDE Canada :
CAN ICES-3 (A) / NMB-3 (A)
.
