UM2032 Rev 3
13/40
UM2032
Hardware layout and configuration
39
5.1 32F412GDISCOVERY
Discovery kit mechanical drawing
Figure 6. 32F412GDISCOVERY mechanical drawing (dimensions in millimeters)
5.2 Embedded
ST-LINK/V2-1
ST-LINK/V2-1 programming and debugging tool is integrated into the
32F412GDISCOVERY Discovery kit.
For information about the debugging and programming features, refer to the
ST-LINK/V2 in-
circuit debugger/programmer for STM8 and STM32
user manual (UM1075). For a
comparison of the various ST-LINK solutions, refer to the
Overview of ST-LINK derivatives
technical note (TN1235).
5.2.1 Drivers
ST-LINK/V2-1 requires a dedicated USB driver, which, for Windows
®
7, Windows
®
8 and
Windows
®
10, is available from
www.st.com
.
In cases where the STM32F412 Discovery board is connected to the PC before the driver is
installed, some STM32F412 Discovery board interfaces might be declared as “Unknown” in
the PC device manager. In such cases, the user must install the dedicated driver files and
update the driver of the connected device from the device manager, as shown in
Note:
It is preferable to use the “USB Composite Device” handle for a full recovery.
2
8
1
6
5
4
8
5
4
13
12
48
1
8
24
37
1
1
2
5
6
10
7
25
36
25
2
1
1
109
108
73
6
2
1
72
144
37
1 8
8 1
8
5
36
4
5
3
1
D
A
50
49
50
49
29
28
22
2
23
44
2
26
1
50.8
172
5.08
22.86
65.68
59.35
4.06
23.79
67
48.26
