Page 1/1
London
Dignity, Respect, Pride & Star -
Cherry Pie Matte
St Michel Industries Ltd, PO Box 21 122, Henderson, Auckland | Phone: 09 837 4276 | www.stmichel.co.nz
PLUMBING POSITIONS
St Michel pursues a policy of continuing improvement in design and manufacturing of its products. The right
is therefore reserved to vary specifcations without notice | Revised 06/2018
London 750
Product No: 1183, 1185
London 1500DB
Product No: 1195, 1197
London 900
Product No: 1187, 1189
London 1200
Product No: 1191, 1193
Hot & Cold Water Inlet
(830-950)
250
200
Finished Floor Level
Finished top surface
100
to waste
outlet
CL
372
100
to waste
outlet
CL
447
250
200
Finished Floor Level
Finished top surface
(830-950)
100
to waste
outlet
CL
597
It is important to decide on
what height you want your
finished top surface from the
floor, this will determine where
your plumbing will be
positioned.
Finished Top Surface
Waste Outlet
Vanity Range
Basins
Please note that these plumbing positions are for top mounted tapware. If you are
installing wall mounted tapware please check the tapware manufacturers instructions
for plumbing positions and installation guides.
It is important to decide on
what height you want your
finished top surface from the
floor, this will determine where
your plumbing will be
positioned.
Finished Top Surface
100
to waste
outlet
CL
900
297
297
100
to waste
outlet
CL
We suggest that you install your Wall hung vanity between 830-950mm high
to the finished top surface.
For internal division positions - please refer to cabinet specifications
Note: Waste outlet positioned for standard chrome bottletrap and pop up
basin waste.
Illustrations are representations and not to scale
