F. Route the speaker wire away from any moving parts and any
sharp metal, then connect to the amplifier
US-C65
F
WIRING INSTRUCTIONS
For proper sound when not using the SSV Works speaker harness, ensure the speaker polarity is correct connect the “+” to the “+” and the “-“to the “-“from
the speaker wire to the amplifier. If using with an SSV Works complete system refer to the amplifier wiring instructions for more detailed wiring information.
“+”
“+”
“-”
“-”
© 2017 SSV Works, Oxnard, CA 93030 US-C65 Rev. C 10-25-17
Amplifier
Connecting the US-C65 using the pre-installed, two-pin connector will require an optional SSV Works plug-&-play harness (WP-H1150 - sold
separately). If you are not using the WP-H1150 harness, simply cut off the two-pin connector and follow the wiring instruction below.
USING A SSV WORKS HARNESS
