D. Place both ring mounting clamps on the cage using the plastic bag to prevent scratching, place the cage mount pod in its final mounting location and
secure to the clamps using the two (2) M6 allen socket head bolts and washers with a 5mm allen key.
US-C65
A. Find the best orientation for the speaker on your bar and
screw in the Set Screws in the OPPOSITE holes of where the
clamp will install into.
B. Loosely install the clamp base to the cage mount pod with the
two (2) M6 hex head bolts and washers, place the cage mount
pod in the desired mounting location on the vehicle. Once the
ring adapter is in the desired position, tighten the two (2) bolts
using a 8mm open wrench.
A
B
Connect and install the speaker into the enclosure (be sure to connect the “+” speaker wire to the “+” terminal on the speaker and the
“-“ speaker wire to the “-“ terminal on the if not using a SSV Works speaker). Use a #2 Phillips screwdriver to mount the speaker to the
pod using the provided #7 (holes are pre-drilled for use for #7 screws)
D
D
D
WHEN INSTALLING YOUR OWN SPEAKER:
