SST SST-ASI-SLC, User Manual

Page: 73 / 74

67
Marking of this equipment with the symbol indicates compliance
with European Council Directive 89/336/EEC - The EMC Directive. This
equipment meets or exceeds the following technical standards:
• EN 50081-2:1994 - “Electromagnetic compatibility - Generic
emission standard Part 2. Industrial Environment.”
• EN 50082-2:1995 - “Electromagnetic compatibility - Generic
immunity standard Part 2. Industrial Environment.”
NOTE: In order to maintain compliance with the limits and requirements of
the EMC Directive, quality interfacing cables and connectors must be used
when connecting to this device. Refer to the cable specifications in the
SST-ASI-SLC User’s Guide for selection of cable types.
IMPORTANT
This equipment is not designed and not intended to operate in installations
where it is subject to hazardous voltages and hazardous currents.
C
CE Notice