manualshive.com logo in svg

SST Automation GT200-PN-CO, User Manual, Page: 32 / 32

Share
Download
SST Automation GT200-PN-CO User Manual Download Page 32

WWW.SSTAUTOMATION.COM

29

5 Software Instructions

5.1 SST-TC-CFG

SST-TC-CFG is the configuration software which can be used to configure GT200-PN-CO. It is based on

Windows OS. Download the software on

www.sstautomation.com

and run the setup program to begin the

installation. Please follow the prompts to install the software.

For detailed software content, please see "SST-TC-CFG Software Content". Or open the SST-TC-CFG, select

"Help" >> "Content" on the menu bar.

5.2 SST-CANopen-COM

SST-CANopen-COM can realize network configuration based on CANopen device, and has EDS parsing function.

Users can configure CANopen slave devices through CANopen software and CANopen master module.

SST-CANopen-COM supports max input data bytes is 384 bytes and output data bytes is 384 bytes for

GT200-PN-CO.

For detailed software content, please see "SST-CANopen-COM Software Content". Or open the

SST-CANopen-COM, select "Help" >> "Content" on the menu bar.

Summary of Contents for GT200-PN-CO

































Reviews:

No comments