User Manual
Industrial Ethernet Serial Gateway
Modbus Serial/TCP Series
WWW.SSTCOMM.COM
18
3.3.2 Ethernet parameters
Ethernet parameters include: “Name”, “Assign IP Mode”, “IP Address”, “Subnet Mask”, “Default Gateway”,
“DNS1” and “DNS2”.
Name——enter a name to identify the device in order to distinguish from other equipment;
Assign IP Mode——set the IP address configuration mode of the equipment;
IP address——set IP address of the equipment;
Subnet Mask——set subnet mask of the equipment;
Default Gateway——set gateway address of the equipment;
DNS1——0.0.0.0 (currently only support 0.0.0.0)
DNS2——0.0.0.0 (currently only support 0.0.0.0)
Notes:
The name cannot have spaces, up to 20 characters.
3.3.3 Serial parameters
Serial parameters include: “Baud Rate”, “Parity”, “Stop bits” and “Data Bits”.
