SST Automation GT200-HT-MT, User Manual

Page: 40 / 45

WWW.SSTCOMM.COM 36
6 Working Principle
The GT200-HT-MT has 8156 bytes of input and output buffers to exchange data. 0 ~ 4999 of the buffer is used for
the HART input data and output data. 5000~8155 of the memory is used for the status of the HART channel and
control variables. The specific assignment is shown in the table below:
Buffer
address
Corresponding
Modbus register
address
Data offset Read/write
permission Description
Input/
output
data
0-2999 0-1499 Read The area of HART
input data
3000-4999 1500-2499 Read/Write The area of HART
output data
HART
channel
5000-5019 800-809 0-19 Read Device 0_cmd0 data
5020-5039 810-819 20-39 Device 1_cmd0 data
…… …… ……Device 15_cmd0
data
5320 960H 320 Gateway status
5321 960L 321 The number of
sending times of
HART data
5322 961H 322 The number of
receiving times of
HART data
5323 961L 323 Error times of HART
communication
5324 972H 324 The response status of
Device 0_cmd0
5325 972L 325 The response status of
Device 1_cmd0
…… …… ……The response
status of Device15
_cmd0
5340-5439 980-1059 340-439 The response status of
user’s commands
5440 1060-1195 Reserved