manualshive.com logo in svg

SSS Siedle ASH 670-04 M, Commissioning Instructions, Page: 60 / 166

Share
Download
SSS Siedle ASH 670-04 M Commissioning Instructions Download Page 60

60

Installing the missing soft

-

ware platform (Microsoft 

.NET Framework 4.6.1)

For operation of the Access system 
from V 4.0.0, the Microsoft .
Net Framework 4.6.1 for 
Windows Server 2012 R2 is required.

Important!

If you have 

not

 installed the 

Microsoft .Net-Framework 4.6.1

 

on the server operating system, you 
can 

not

 install the Access system, as 

this will result in a forced cancella

-

tion of the installation process.

Remark

The Microsoft .Net Framework 4.6.1 
is available in two variations:
• 

Offline installer

 for installations 

without an internet connection
• 

Web installer

 for installations 

over the internet

Procedure
1 

Save the 

.Net Framework 4.6.1

 

on the desktop of the server oper

-

ating system.

2 

Start the installation with a double 

click on the program icon.

3 

Accept the licence terms

4 

The 

.Net Framework 4.6.1

 is 

installed on the server operating 
system.

5 

End the installation following com

-

pletion by clicking on 

Finish

.

Setting up the server operating system

Setting up and configuring the DHCP server service

Summary of Contents for ASH 670-04 M







































































































































































Reviews:

No comments