4
21
2.3
SETTING UP WITH A DMX512 CONTROLLER
2.3-1 DMX512 ADDRESSING WITHOUT ID ADDRESSING
(
TOUR MODE)
The figure above shows a simple DMX512
layout with the starting address of the first
unit set at 1, with the second set at 11and
so on... (Note that when used in this way,
the Ch10 ID function must be inactive (CH10=0))
DMX512
CONTROLLER
Connect the DMX512 controller to the units in series.
Each unit has 10 DMX channels so the DMX Addresses should increase by
increments of 10 (e.g. 1,11,21,31...)
The ID address has not been set so therefore when using the controller CH
10 must be inactive ( CH10=0 ).
It is also possible to deactivate ID address selecting
ID OFF
from the
Settings
menu. on the fixture
Each DMX Address may be used as many times as required.
Any DMX address in the range from 001 to 512 may be used.
2.3-2 DMX512 ADDRESSING WITH ID ADDRESS
(TOUR MODE)
Connect the DMX512 controller to the units in series
Each unit has 10 DMX channels so the DMX Addresses should increase by
increments of 10 (e.g. 1,11,21,31...)
Each DMX Address may be used as many times as required.
Any DMX address in the range from 001 to 512 may be used.
Each DMX address may carry up to 66 separate ID addresses.
ID
should be set in the menu on each unit in ascending values
(i.e. 1,2,3...)
ID On
should be set in the
Settings
menu on each unit.
ID addresses are accessible from Ch10 on the DMX512 controller.
Example:
............
DMX Addr.1
DMX Addr.11
DMX Addr.21
ID ADDRESS
ID1~ID66
ID1
ID2
ID3
ID4
ID5
ID6
ID7
ID8
0
9
10
19
20
29
30
39
40
49
50
59
60
69
70
79
80
89
1~20Hz
STROBE
5
NO FUNCTION
WARM WHITE
COOL WHITE
CHANNEL
FUNCTION
VALUE
6
WHITE MACROS
0
9
NO FUNCTION
ID11
ID12
ID13
110
119
120
129
130
139
ID14
ID15
140
149
150
159
ID21
210
ID66
255
ID20
200
209
ID18
ID16
ID17
160
169
170
179
180
189
ID19
190
199
ID9
ID10
90
99
100
109
