18
Reset Factory Settings
RESET button is placed on the housing
and must be activated with either a
ballpoint pen or thin metal object.
The RESET button is to be activated for
the following reasons:
Basic Operation
Balance:
Fader:
R 0-10 to L 0-10 .
Adjust sound balance between left
and right speakers by using VOL + / -
F 0 10 to R 0 -10 .
Adjust sound balance between front and
rear speakers by using VOL + / VOL - .
.
-
FM1
106.30
MHz
ST
DX
TA
LUD
SWF
POP
11:08
DISC
(Press this button longer again to
renew it . )
NOTE:
If RESET is selected, all memory data
will deleted, please re-adjust .
A. Initial installation of the unit when
all wiring is completed.
B. All the function buttons do not operate.
C. Error symbol on the display.
Touch the screen the DSP range
(or press the EQ/LOUD button
on the remote ) to select one of
the preset sound modes .
(Rock/Pop/Jazz/Classic/Flat) .
The information will display in the
monitor as follow :
Setting Audio Modes
DSP
It`s depend on your habit to select the Audio mode .
POP
FLAT
ROCK
CLASSIC
JAZZ
DVD 11-0:44:36
LUD
SWF
POP
11:08
DISC
OSD
TA
AF
CLK
SWF
LUD
DSP
RDM
INT
RPT
touch to select
Note :
Once one of these settings is chosen,
the Bass & Treble settings will no longer
be there.
You will have to turn this feature off to
gain back your Bass & Treble.”
AUX IN
RESET
RESET
Scroll Caption Adjustment
In Radio mode:
You can adjust your desired scroll
caption , the method of the operation
as follow:
A). Press and hold the SETUP button
(for about 2 seconds) on the remote
control, the adjustment scroll bar will
display on the screen .
B). Use the VOL+/- to select among of
the “A, B, C ....X, Y, Z, and blank ”, and
use the
/
button on the front panel
to ahead/back (proceed/cancel) , and
then press the SETUP button briefly to
confirm .