SSET CE-VJ41 -9MSK-0.5 Series, Instructions

Page: 1 / 3

http://www.ce-transducer.com 3rd Floor, building 1, Zaimao industrial park, Baoji road, Bantian, Longgang district,
sales@ce-transducer.com Shenzhen City, China Post code: 518049 0
Three-phase four-wire AC voltage transducer
Istructions
CE - VJ41 - *9MSK - 0.5
1 Overview
This device is a 3-phase AC voltage isolation transducer. Using the
principle of electromagnetic isolation to measure the three-phase
AC voltage signal, isolate and linearly output a variety of
selectable standard signals. It can widely used in AC voltage
signal real-time detection and monitoring, communications,
electricity, railways, industrial control and other fields.
Features
：
Ø
Easy installation;
Ø
High precision, low temperature drift;
Ø
Three-phase voltage independent of each other;
Ø
High reliability.
2
Case Style
Figure 1, MSK outline
3 Part Number
4 Specifications
Test conditions: auxiliary power: 220VAC, room temperature:
25
°
C;
Input Range: 0~600VAC;
Output: 0~5VDC, 0~10VDC, 0~20mADC, 4~20mADC;
Power supply: 85~265VAC/DC;
Accuracy: 0.5;
Load capacity:
≥
2K
Ω
(voltage output),
≤
250
Ω
(current output);
Temperature drift:
≤
500ppm/
°
C
;
Isolation voltage:
≥
2500 VDC;
Response time:
≤
300 mS;
Rated power consumption: 1W (voltage output); 2W (current
output);
Output ripple:
≤
10mV;
Frequency range: (45~65Hz up to 5K, please specify when
ordering);
Surge immunity:
Power port level
±
0.5KV (L-N/2
Ω
/integrated wave)
Analog I / O port.
±
0.5KV (L-N/40
Ω
/ integrated wave)
Impulse immunity: input / power port
±
2KV, analog I / O port
±
1KV;
Input overload capacity: Voltage: 2 times the nominal value;
Operating temperature: -10 ~ 60
°
C; humidity:
≤
95 %( no dew);
Storage temperature: -55 ~+65
°
C
;
humidity:
≤
95 % (no dew).
5 Connections Diagram
(For reference only, the actual application to the product wiring
diagram shall prevail)
Figure 2, CE-VJ41-39MSK/CE-VJ41-89MSK voltage output,
CE-VJ41-49MSK/CE-VJ41-59MSK current output Product
wiring diagram.
6 Installations
DIN35 rail mounting or screw mounting, the installation size
as shown in figure (in mm).
Figure 3, SK outline installation dimensions
7 Product
’
s Service
1 Installation
1.1 DIN rail installation method:
①
Fix the transducer on the side of the card slot and hook on the
mounting rail;
②
Pull the spring pin down;
③
Clip the transducer mount on the mounting rail;
Phase-A
Phase-B
Phase-C
Power Supply
Phase-CA
Phase-BC
Phase-AB