________________________________________________________________________________________________________________________________________________________________________________________________________________________
07-02-10-01-E-V0304.doc
Product Manual Type:
637f
61
Wiring
instructions
Electromagnetic compatibility (EMC)
6.7.2
Example for mounting
Cont rol cubibcle grounding bar
cable channel for power cables
Cable channel for control lines
Leitungen dicht an Metallt eilen führen
Place cables close to metal-parts
und von Leistungsleitungen trennen
and separate them f rom power-lines
COM2
X10
X30
X40
AC power input
Eurotherm-motor cable Type KM...
Line
-
Fiter
Eurotherm resol ver cable model K IR
Line feed-in
conductive area, remo ve vanish
ground connection
Conductive area to screen or EMC-Clamp ( accessories)
Conductive area to
screen
Toroidal Ferrit e Eurotherm-model FR if required (see chapter 5.6)
Cont rol voltage
DC 24V
expanded
view
put wires into insulation-tube
Output
Input
Mounting plate in the control cabinet
Flat cable in case of
short distance.
otherwise:
screen Cable
COM1
