Chronos AIS AtoN Transceiver
QUICK-START GUIDE
What’s in the box?
Transceiver connections
VHF antenna
(Connector: male
N type)
PC
For full instructions of how to install and use your
AIS AtoN Transceiver please refer to the Installation
and Operation Manual which can be found on the
CD provided with the product.
What do I need?
201-0620:6
www.srt-marinesystems.com
Link (direct sensors or via
Chronos Sensor Interface)
Power/USB
GPS antenna
VHF antenna
Earth stud
Pozidriv (PZ2)
screwdriver
M4 spanner
12V/24V
power supply
GPS mounting (1" 14 TPI)
Length of cable
(Diameter of 6.5mm to 9.5mm)
Required for light/RACON
connection only.
Earthing
This product MUST be
connected to protected
earth via the earth
connection point.
VHF connector
VHF antenna
AIS AtoN
Protective earth connection
(e.g., to a metal structure)
Surge arrestor
Earth bonding wires
Earth
connection
point
Installation
PC
The earth stud must be connected to an earth point.
2. Direct light/RACON installation
3. Installation with a Sensor Interface
VHF antenna
GPS antenna
12V/24V
power supply
Earth point
AIS AtoN
Transceiver
Sensor
Interface
Light
(optional)
RACON
(optional)
Other sensors and monitoring
equipment (optional)
VHF antenna
GPS antenna
12V/24V
power supply
Earth point
Light
(optional)
RACON
(optional)
AIS AtoN
Transceiver
1. Basic installation
VHF antenna
GPS antenna
12V/24V
power supply
Earth point
AIS AtoN
Transceiver
PC
Power and USB cable
Backshell
connector
AIS AtoN Transceiver
Flyer
GPS antenna
USB configuration cable
Quick Start
Guide
Fixings
Surge Arrestor
RG213 Patch cable
Self amalgamating
tape
