Technical information
Page 61
5.3 Troubleshooting
Issues
Possible cause and remedy
No data is being
received by a connected
chart plotter
●
Check that the power supply is
connected correctly.
●
Check that the power supply is a
12VDC or 24VDC supply.
●
Check that the connections to the
chart plotter are correct.
The screen is not
illuminated
●
Check that the power supply is
connected correctly.
●
Check that the power supply is a
12VDC or 24VDC supply.
●
Press and hold the
Chart / Screen
brightness’
button for at least 5
second. The display should return to
maximum brightness.
Summary of Contents for 427-0002B
