AFM 4-2
Preflight
Swift GCS features a built-in checklist that guides the user through the preflight process. This is
done with a series of manual and automated checks. Each preflight step features an optional
expanded information section to help new users and display relevant information.
Mission Planning
A large portion of the preflight revolves around mission planning. This is done by creating waypoints
that the aircraft will fly to or actions to be performed. Waypoints are uploaded to the autopilot via the
telemetry radio and can also be uploaded while in flight if a mission needs to be adjusted.
Moving Base
Swift GCS is capable of reading the GPS position from a GPS equipped laptop or tablet and
displaying it on the map. This is referred to as moving base and can be quite useful for situational
awareness while in the field, especially if are moving around. If moving base is enabled, your
position will be indicated on the map with a pedestrian icon. The bottom status bar will now indicate
the distance the aircraft is from the base, rather than the distance from home.
Handheld Transmitter
The handheld transmitter is used to fly Lynx manually or in an autopilot assisted flight mode.
Additionally, it is used for the following: preflight checks, changing autopilot modes, initiating or
aborting a manual deep-stall landing, steering during a manual deep-stall landing, and stopwatch
timer.
4
