All-in-one solar charge inverter V1.0 13
：Ground
L：Live N：Neutral
③
Properly connect the AC output wire according to the wire sequence and terminal
position shown in the figure below. Please connect the ground wire first, and then
the live wire and the neutral wire. The ground wire is connected to the grounding
screw hole on the cabinet through the O-type terminal.
：Ground
L：Live N：Neutral
Note:
The grounding wire shall be as thick as possible (cross-sectional area is not less than 4mm
2
).
The grounding point shall be as close as possible to the all-in-one solar charge inverter. The
shorter the grounding wire, the better.