Schoberer Rad Messtechnik GmbH
Rudolf Schulten Str. 6
D-52428 Jülich
Tel.: +49-2461-69123-0
Fax:+49-2461-69123-17
www.SRM.de
Page 9 of 22
IndoorTrainer electronic User Manual
Options for Controlling the Electronic Brake
There are four options for controlling the electronic brake of your SRM IndoorTrainer:
Manual control via two keys on the handlebars
Manual control via +/- icons in the software
Automatic mode with customized resistance increments
Workout mode: define a workout in the Gobat software
Controlling the Brake via the Keypad on the Handlebars
Use the red keys to increase or decrease the
resistance in pre-defined increments.
Manual Mode
The keypad is in Manual Mode if the orange light between the keys is off. In manual mode, the brake has 30 pre-
programmed resistance levels that cannot be changed. Push the right key to decrease the resistance by one
level. Push the left key to increase the resistance by one level. The orange light flashes once every time a key is
pushed.
Automatic Mode
Push both keys simultaneously to switch from Manual to Automatic Mode. The orange light is now on. By pushing
the keys, the wattage increases or decreases in increments which may be customized in the Gobat software (see
the sections: Workout Mode: Customized Control via Computer, Brake Setup). This setting is recommended for
repeats and interval training. The initial setting is in 10 W increments. Connect your IndoorTrainer to a computer
in order to customize the settings. In order to switch back to manual mode, push both keys simultaneously. The
light turns off.