SR
SYSTEM-ELEKTRONIK GmbH
|
Eschachstr. 23
|
D-78078 Niedereschach
|
phone +49 77289268-0
|
Seite | 10
Notes on compliance with the EMC Directive (CE mark)
Within the EU, laws require compliance with uniform limit values for interference radiation
and interference immunity. The TFT monitor is built in such a way that these limits are
complied with. It is therefore provided with the CE mark and a declaration of conformity.
Outside the EU, the respective national regulations must be observed.
Devices that are connected to the TFT monitor must also comply with the corresponding
limit values. This is the only way to ensure that the entire system complies with the legal
regulations. Make sure that all devices have an appropriate test mark or manufacturer's
declaration.
The connection to the connected devices must be made via shielded cables. Cables with foil
shielding are less suitable than cables with braided shielding and a high degree of coverage.
The connector housing must have an all-round connection with the cable shield.
EMV
•
This is a Class A device (industrial use). It may cause radio interference in residential
areas. In this case, the operator may be required to implement appropriate measures
and to pay for them.
•
The present device serves as an installation component in an industrial application.
The operator of the overall system is required to comply with the electromagnetic
compatibility according to the EMV law.
