Sri ProPlus 50220TK Owner'S Manual Download Page 1

 

V1.1  04212015 

     

 

 

PAGE 1 

800-727-7471  •  www.sapsis-rigging.com  •  [email protected]

 

3883 Ridge Avenue, Philadelphia, PA 19132

  •  

FAX: 215-228-0888 

 

 
 

 

 
 

 

Owner’s Manual For All ProPlus™ Harnesses 

 

Thank you for selecting a ProPlus™ harness! Please read this manual carefully and 
retain it for future reference. 
 
ProPlus™ fall arrest and work positing equipment is designed by entertainment 
professionals for entertainment professionals and proudly made in the USA.  

 

Caution: 

 

 

This product is part of a personal fall arrest, work positioning, suspension 
and/or retrieval system. Read, understand, and follow all instructions. Failure 
to do so may result in serious injury or death.  

 

Do not use unless properly trained. Users should be familiar with and 
comprehend the OSHA regulations, ANSI standards, and other relevant 
regulations and standards pertaining to fall hazards; and the selection, use 
and maintenance of fall protection equipment.  

 

It is the employer’s responsibility to ensure that all users are properly trained 
in the proper use, inspection, and maintenance of Personal Protective 
Equipment including fall protection equipment.

  

 

Important: 

 

 

If  you  have  questions  on  the  use,  care  or  suitability  of  this  equipment, 
please call (800) 747-7271 or write 

[email protected]

 

 
 
 

 

 

Summary of Contents for ProPlus 50220TK









Reviews: