6400 West 105th Street / Bloomington, MN 55438 / www.problemsolversbike.com
Thanks for buying a Problem solvers mismaTCh2!
Clean up your handlebars with the MisMatch Adapter. Version 2 allows you to
connect your Shimano I-Spec™ compatible shifters to your Avid hydraullic
brake levers via SRAM’s MatchMaker™ clamp (to perform the opposite
connection, see MisMatch Adapter Verson 1). Enjoy.
WARNING: CYCLING CAN BE DANGEROUS. BICYCLE PRODUCTS SHOULD
BE INSTALLED AND SERVICED BY A PROFESSIONAL MECHANIC. NEVER
MODIFY YOUR BICYCLE OR ACCESSORIES. READ AND FOLLOW ALL PRODUCT
INSTRUCTIONS AND WARNINGS INCLUDING INFORMATION ON THE
MANUFACTURER’S WEBSITE. INSPECT YOUR BICYCLE BEFORE EVERY RIDE.
ALWAYS WEAR A HELMET.
For additional technical and safety information, visit:
www.problemsolversbike.com/safety
ComPaTibiliTy/inTended use
The MisMatch2 is designed for use with Avid Matchmaker compatible brake
levers and Shimano I-Spec compatible shifters. These adapters will simplify and
unclutter your mountain handlebars.
Tools required
4mm Allen wrench
#2 Phillips head screwdriver
Torque wrench
insTallaTion:
Remove the Right Shifter’s I-Spec Integration Unit
NOTE:
Let’s be honest with ourselves—we’re going to be messing with the
innards of a shifter. Make sure to be working in a clean, open space so you can
keep track of everything. If you’ve ever tried to find small replacement parts for
these types of components, you know: DON’T LOSE ANYTHING!
NOTE:
We demonstrate this installation using a Shimano Saint Shifter
(SL-M820-I). While most of the steps are the same, we STRONGLY
RECOMMEND you visit Shimano’s website to view the installation instructions
and diagram of your shifter: techdocs.shimano.com
1. Start by removing the top bolt of the unit using a 4mm Allen wrench
(figures 1–2). Save this bolt; you’re going to need it.
4743 10/13
mismaTCh adaPTer 2 insTruCTions
Figure 1
Figure 2
ITEM NO.
DESCRIPTION
QTY.
1
MisMatch Adapter 2 - left
1
2
MisMatch Adapter 2 - right
1
3
M5 x 10mm bolt
2
1
2
3
