background image

Model SR7020

i

 Wall Mount Platform Scale 

Operating and Service Manual  
Part No.MAN7020I_MICROBAN_200520 

 

Page 6 of 16 

 

S

Instruments, Inc.

600 Young Street, Tonawanda, NY  14150 

Tel:  716-693-5977     Fax:  716-693-5854    URL:  

www.srscales.com

 

email:  

[email protected]

       Copyright 2020

 

S

Instruments, Inc. 

REPLACEMENT PARTS and ACCESSORIES 

 

 
 

SYSTEM DESCRIPTION and INTENDED USE 

 

SYSTEM DESCRIPTION 

The  SR7020

i

  Wall  Mount  Platform  Scale  system  employs  the  latest  in  microprocessor  and  load  cell 

technology  to  provide  accurate  and  repeatable  weight  data.  Four  (4)  identically  matched  transducers  are 
strategically placed to ensure an accurate representation of the patient’s weight. 

The SR7020

i

 low power microprocessor circuitry is powered by a Medical Grade AC power supply. 

The patient’s weight is displayed on a 16-character dot matrix LCD w/LED backlight. The weight data may 
be viewed either in pounds or kilograms with a displayed resolution of 0.1 for each. 

The SR7020

i

 Wall Mount Platform Scale system

 

has a 38” x 58” (96.5 cm x 147.3 cm) platform weighing 

surface. 

The scale system has a programmable Automatic Power Down (APD) for adjusting scale on-time. 

 
 

INTENDED USE 

The  SR7020

i

  Wall  Mount  Platform  Scale  system  is 

specifically  designed  for  weighing  ambulatory  and  non-
ambulatory stretcher and wheelchair bound patients and is a 
preferred  means  of  gathering  patient  weight  data  of  up  to 
1000 pounds or 454 kilograms. 

 
Platform should be stored in the upright position when not in 
use to prevent a trip and fall hazard. 

 
 
 
 
 
 
 

MICROBAN ANTIMICROBIAL PROTECTION 

 

Microban® antimicrobial technology has been added to help reduce the growth of bacteria as part of a 
medical center's approach to creating a cleaner healthcare environment. For more information, visit 

https://www.microban.com/sr-scales

 

 

Part # 

Description 

FRTP211C1 

Paper, thermal printer 58mm (15 rolls) 

FRME20A0903F01 

Medical Grade AC Power Supply  

FRPCORD3 

3 Foot Ultra Low Profile Angled Power Cord 

FRPCORD6 

6 Foot Ultra Low Profile Angled Power Cord 

WARNING 

DO NOT EXCEED 

MAXIMUM WEIGHT LIMIT OF 

1000 LB / 454 KG

 

WARNING 

DEVICE COULD BE A TRIP AND 

FALL HAZARD IF PLATFORM IS 

LEFT IN THE DOWN POSITION

 

Summary of Contents for SR Scales SR7020i

















Reviews: