Model SR555
i
Stand-On Scale
Operating and Service Manual
Part No. MAN555
i
_MICROBAN_201001
Page 14 of 22
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
Copyright 2020
S
Instruments, Inc.
BATTERY REPLACEMENT
STEP 1:
The display will read “
REPLACE BATTERIES
”.
STEP 2:
(Figure 8) Place the scale on its side and open the battery compartment cover located in
the bottom of the scale base.
STEP 3:
Remove and replace ALL six (6) “C” cell batteries. Refer to diagram on the battery
compartment cover for placement.
STEP 4:
Press the “
WEIGH
” button to confirm display is working.
STEP 5:
Tightly close the cover.
STEP 6:
Zero the system.
Figure 8: Bottom of Scale Base
WARNING
DO NOT remove batteries while scale is on.
Allow scale to shut down naturally thru
timing out. This prevents possible voltage
drain on the printed circuit board coin
battery.