Registered in England No. 88907
Tel: 01902 308050 Fax: 01902 308051
E-Mail: [email protected] Website: www.squirelocks.co.uk
Henry Squire & Sons Limited
Hilton Cross Business Park, Cannock Road, Featherstone, Wolverhampton, WV10 7QZ
Recoding Instructions
How to recode the SS50 COMBI
Lock Diagram
Code Indicator
Re-code Tool
4.
The lock is pre-set at 00000. Set the
wheels to this code then pull the body
sleeve to open it.
The code can only be
changed when the lock is open.
To set your own code, first write down
your new code in the box provided below.
Choose a code which is easy to remember
but is not easily guessed.
Insert the re-code tool into the wheel you
wish to change.
Using the re-code tool as a lever, rotate
the wheel to the required number, then
go past the code indicator until the lever
stops on the lock body, now turn the
Repeat instructions 3-4 for the additional
wheels you wish to change.
Close shackle and test the code by pushing
and pulling the body sleeve to close and
open the padlock
Your lock is now ready to use.
Remember to scramble the wheels when
closing the lock.
5.
6.
7.
8.
1.
2.
3.
Instructions
Record your code & store in a safe place
IMPORTANT - Lubricate frequently with WD40 or a light oil
wheel back until the required number lines
up with the code indicator, you will feel it
click into place. You may rotate the wheel in
either direction. Ensure that the number
lines up with the code indicator.
Body Sleeve
