SPYKER 288 SUPER Operation Manual Service Manual Parts List Download Page 1

spread with confidence

Spreading Chart

Operation Guide

Service Manual

Parts List

spread with confidence

It’s the spread that counts

It’s the spread that counts

For Model:
288 SUPER

1-800-972-6130
Fax: 260-774-3416

P.O. Box 7

140 Mill Street

Urbana, IN

46990  USA

P.O. Box 7  •  140 Mill Street  •  Urbana, IN  46990  USA

1-800-972-6130  •  Fax 260-774-3416

"ACCUWAY'' Spread Pattern Equalizer

ENSURES spreading dead center of the
spreader. 

(Indicated with "22" in model number)

Gears are unconditionally guaranteed

ENSURES trouble free operation.

Dial-A-Matic spread rate control

ENSURES spreading at exact spread
rates.

Optional BORDER PATROL spread pattern

cut-off prevents spreading on drive-ways,
flower beds, etc.

Extension hoppers available for all round 

hopper spreaders. Adds 20 lbs. to 
capacity.

Shipped Set-Up. Saves time and labor

ENSURES proper assembly. (except #64)

Stainless steel frames ensure longer

spreader life, easier maintenance and

present a quality image.

High grade plastic non-corroding wheels

with nylon bearings, no lubrication

required, ENSURES trouble free 

maintenance.

© 2006 Spyker Spreaders – Urbana, IN U.S.A. 

05-90-0054

MODEL 299

Mulch Spreader

FEATURES &
BENEFITS

MODEL 298

Mulch Spreader

70 SERIES

90 SERIES

20 SERIES

179 SERIES

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for 288 SUPER









Reviews: