SpyCameraCCTV.com
Operation Manual-4CH Duplex DVR
7
stopped.
To continue playback, push the “PLAY” button.
⑿
Menu / ESC
It displays menu option or will be to the previous.
⒀
UP / DOWN
To change a menu field, use the “UP” or “DOWN” buttons.
⒁
Select /Enter
Use this button to change values on main menu or sub menu setting. Also use can use this
button to increase value when adjusting parameters.
4. GETTING STARTED
Install a hard disk drive into your DVR.
Connect DVR to monitor.
Connect cameras (up to 4) to DVR.
Connect other peripheral devices (mouse, USB Drive) if necessary. And PS/2 Mouse must
be connected to DVR before startup system.
Connect the power adapter into DVR to turn on the DVR.
Start TV Monitoring and Recording.
Make sure that a hard disk drive and camera(s) are properly installed.
If a removable HDD rack is used in DVR, after installation of hard drive, the hard drive
drawer must be locked with key.
If a fixed HDD rack is used in DVR, after installation of hard disk drive, the hard disk drive
must be fixed tight enough with bolts.
If the power is turned off while recording (i.e. a power failure), the DVR will enter “Power
Recovery” modes at start up, detect that it has been shut down, and then reinitiate the
recording process.
