MicroSD Card
Install the micro SD card in to the slot on the top
of the unit. Push it in until it ‘clicks’. To remove,
push it until it ‘clicks’ again, then release and it will
spring out enough to be able to remove.
Charging the unit
Connect the supplied charger to the USB port of
the device. The red light will come on to indicate
it is connected to the adapter. Once fully charged
the red light will go out.
Playback on your computer
For playing back the files on your computer, we
recommend using VLC Media Player. The latest
version can be downloaded for free from http://
www.videolan.org
Powering on the unit
Once fully charged; press the power button on
the remote. The blue status light will come on to
indicate the unit is powered on.
Recording video
Once powered on, press the video record button
on either the remote or the device. The blue light
will flash to indicate the unit is recording. To stop,
press the record button again and the blue light
will stop flashing to indicate the unit is powered
on.
Motion detection recording
Once powered on, press the motion record
button on the remote. The blue light will flash
then turn solid blue. The unit is now in motion
detection mode. Every time it detects motion the
blue light will flash for the duration it is recording,
then go back to solid blue.
Product Guide:
SPYIR226
Getting Started
