9
Original instructions
> English
3. The bottom of the Ultima Switch can be mounted higher but never
lower than the base of the pump.
Note: If your mounting the Ultima Switch on the side of the boat,
make sure you fasten the Ultima Switch using the side posts and
observing the same mounting instructions as you would installing the
Ultima Switch in a vertical position.
Mounting:
1. Mark pilot holes in the base of the Ultima Switch by using the
Ultima Switch holes.
2. In order to avoid drilling through the hull of the vessel, set your
drill to the appropriate depth for the pilot holes.
3. Fasten the Ultima Switch directly to the block using #8 x 5/8”
long stainless steel screws (not supplied).
Use these
holes for side
mounting
Use these
holes for bottom
mounting
