Chapter 10
SEITAL S.r.l.
Rev. 2 of 19/01/98
Page 10-8
Use and maintenance handbook: Centrifugal separator
SE 40CX
n°
TROUBLE
CAUSE
REMEDY
- drilled gasket of dividing disk
(15) fig. 6.1.
Replace gasket.
- OR gasket (4) fig. 6.27 of
cream pump.
Replace gasket.
The holes on dividing disk (16 -
fig. 6.1) or the corresponding
holes on upper edge of bowl
hood
(13
-
fig.
6.1)
are
obstructed.
Open the holes.
15 Foam in the buttermilk or
cream outlet.
Insufficient buttermilk or cream
pressure.
Screw the shutters A and B, to
increase pressure value and
maintain constant the cream
density.
Air infiltration in the product
on the separator feeding line.
Check that every pipe union has
its
gasket,
is
closed
and
correctly expanded.
Check that pump suck under
water head.
Pump must not suck air from
its mechanical seal.
