Chapter 7
SEITAL S.r.l.
Rev. 3 of 02/05/03
Page 7-4
Use and maintenance handbook: Centrifugal separator
SE 40CX
1
st
page (it provides information about machine condition, work program and
separation time):
2
nd
page (to modify the working parameters and to choose the language):
HELP
to
select
discharge
program (possible choice
among 4 cycles)
Stop cycle / Start cycle:
to deactivate / to
activate the cycle
to make a partial discharge
to make a total discharges
>> to visualize the following page
shown alarm message
opening/ closing product inlet valve (lighted
symbol = opened valve)
to modify partial
program parameters
to modify total
program parameters
to modify partial and total
program parameter
to modify washing
program parameters
Work cycle
Separation time
constant pressure valve at outlet of the
separator (bowl machine overflow pushing on
the item)
to visualize all the alarms that intervened on the
machine and the day / time when the alarm
intervened and when it was reset
to visualize the parameters set up on the machine
to choose language
to modify other parameters
