SPXFLOW CombiFlexBloc Series, Instruction Manual

Page: 8 / 79

6
CFB/EN (1808) 2.4
4.4 Checking the sense of rotation 19
4.5 Start-up 19
4.6 Adjustment of shaft sealing 20
4.6.1 Stuffing box packing 20
4.6.2 Mechanical seal 20
4.7 Pump in operation 20
4.8 Noise 20
5 Maintenance 21
5.1 Regular maintenance 21
5.2 Shaft sealing 21
5.2.1 Stuffing box packing 21
5.2.2 Mechanical seal 21
5.3 Lubrication of the bearings 21
5.4 Environmental influences 21
5.5 Noise 22
5.6 Motor 22
5.7 Faults 22
6 Problem solving 23
7 Disassembly and assembly 25
7.1 Precautionary measures 25
7.2 Special tools 25
7.3 Liquid draining 25
7.4 Disassembly and assembly Top Pull Out unit 26
7.4.1 Disassembly Top Pull Out unit 26
7.4.2 Assembly Top Pull Out unit 26
7.5 Replacing the impeller and the wear ring 27
7.5.1 Disassembling of the impeller 27
7.5.2 Mounting the impeller 27
7.5.3 Disassembling the wear ring 28
7.5.4 Assembling the wear ring 28
7.6 Stuffing box packing S2, S3, S4 29
7.6.1 Instruction for assembling and disassembling stuffing box packing 29
7.6.2 Replacing the stuffing box packing S2, S3, S4 30
7.6.3 Mounting a new stuffing box packing S2, S3, S4 30
7.6.4 Disassembling the shaft sleeve 31
7.6.5 Mounting the shaft sleeve 31
7.7 Mechanical seal 32
7.7.1 Instructions for mounting a mechanical seal 32
7.7.2 Disassembling a mechanical seal M0 33
7.7.3 Assembling a mechanical seal M0 33
7.7.4 Disassembling a mechanical seal M1 34
7.7.5 Assembling a mechanical seal M1 34
7.7.6 Disassembling a mechanical seal M2-M3 35
7.7.7 Assembling a mechanical seal M2-M3 36
7.7.8 Removing the electric motor 36
7.7.9 Mounting the electric motor 36
7.8 Replacing the stub shaft and the motor for M0 37
7.8.1 Disassembling the stub shaft and the motor 37
7.8.2 Assembling the stub shaft and the motor 38
8 Dimensions 39
8.1 Dimensions delivery flange 39
8.2 Dimensions suction flange 40