SPX FLOW Johnson pump, Instruction Manual, Page: 11 / 57

KGE/EN (1711) 6.5
Introduction 9
KGE
1 Introduction
1.1 Preface
• The data published in these operating instructions have been based on the most
recent information. They are provided subject to alterations.
• We reserve the right to change the design and/or construction of our products at any
time without being obliged to adapt earlier supplies accordingly.
• These operating instructions (and annex if any) contain useful and important
information allowing your pump to be properly operated and maintained. They also
contain important instructions for preventing possible accidents and serious damage
prior to commissioning and during operation of the installation, thus ensuring as safe
and trouble free an operation of your installation as possible. Carefully read the
instructions prior to putting the pump into operation, familiarize yourself with the
functioning and operation of your pump and strictly adhere to the instructions given. In
this respect we would emphasize the importance of training in the correct handling of
the installation. It is essential that these operating instructions are kept in a fixed place
in the vicinity of the installation.
!
Should you have any further questions or wish to receive additional
explanation regarding specific matters concerning your pump (adjusting,
assembly/disassembly ...) which are not included in this instruction manual,
please do not hesitate to contact our technical or service departments from
SPXFLOW.
1.2 Safety (general)
1.2.1 Signs on the pump
It is imperative that signs affixed to the pump, e.g. arrow indicating the direction of
rotation or symbols indicating fluid connections be observed and kept legible.
1.2.2 This instruction manual is meant for:
• Personnel that should read and understand this instruction manual completely: The
personnel responsible for operation, maintenance, inspection and assembly. These
people must be adequately qualified. Scope of responsibility and supervision of the
personnel must be exactly defined by the plant operator. Moreover, the plant operator
is to make sure that the contents of the operating manual are fully understood by the
personnel.
If the staff does not have the necessary knowledge, they must be
trained and instructed, which may be performed by the machine
manufacturer or supplier on behalf of the plant operator.
• Your technical and servicing personnel which is provided with the required information
in chapter 10 "Parts". Sectional drawings with part lists are intended for those who are
responsible for spare parts ordering.