B. Base
OPERATING INSTRUCTIONS
•
Remove water tank by grasping firmly and pull upwards.
•
Turn water tank over and turn the cap counter-clockwise to open. Fill with COOL tap water or
DISTILLED water. DO NOT USE HOT WATER.
Do not add fragrance or oil in the water – it will cause
malfunction of the unit!
•
Replace the fill cap by turning clockwise – do not over tighten.
NOTE:
When carrying a filled water tank, place one hand under for support.
•
Place water tank back in place, making sure the tank is correctly aligned with the body.
•
Plug in power source and the Power Indicator will light up.
•
Turn the Power/Mist Intensity knob clock wise to turn on. You will hear a “click”.
•
To adjust mist intensity, turn the Power/Mist Intensity knob accordingly. Farthest right is
highest mist output.
NOTE:
•
Once the water tank is in place, do not attempt to move the humidifier. If it has to be moved,
unplug the unit and move with caution.
•
Once the unit is plugged in or during operation, do not attempt to pick up the water tank. To move
the unit or add water to the tank, first turn unit off and unplug power.
•
Pay attention to the water level - add water when low.
STORAGE
•
Save the box for off-season storage.
•
Clean the tank, reservoir and all part thoroughly and dry completely before storage.
•
If water is left in the unit during storage, it may harden and leave deposits that may affect the unit
from operating properly.
5
Nebulizer
Sensor
