26
Format: ASCII:
ESC
c
n
Decimal:
27
99
n
Hexadecimal:
1B
63
n
Explanation:
When the lowest dot n=1, select reverse print; when the lowest dot n=0, prohibit reverse
print.
Remark: Only the lowest dot of n is valid. Default n=1.
Notice: Reverse print not only support character mode but also support graphics mode
and Chinese character mode. When print the graphics in reverse direction, pay
attention to the printing sequence of graphic units, please check ESC K command.
ESC 6
Choose Characters Set 1
Format: ASCII
：
ESC
6
Decimal
：
27
54
Hexadecimal:
：
1B
36
Explanation
：
After inputting this command, all the characters will be printed out
according to the Characters Set 1 in ANK.
ESC 7
Choose Characters Set 2
Format
：
ASCII
：
ESC
7
Decimal
：
27
55
Hexadecimal
：
1B
37
Explanation
：
After inputting this command, all the characters will be printed out
according to the Characters Set2 in ANK.
4.2.4 User-defined Character Setting Commands
ESC
＆
User Define Character
Format
：
ASCII
：
ESC
＆
m
n1
n2……n6
Decimal
：
27
38
m
n1
n2……n6
Hexadecimal
：
1B
26
m
n1
n2……n6
Explanation
：
This command permits user to define one character. Parameter m is
Summary of Contents for SP-RMD12
Page 39: ...37 n 2 Off line status n 3 Error status n 4 paper feeding status...
Page 47: ...45 Characters Set 2...
Page 48: ...46...
