24
ESC 2
[Name]
Setting default height of line
[Format]
ASCII
ESC
2
Hex
1B
32
Decimal
27
50
[Description]
Selecting32 dots (4mm, about 1, 7inch) line height
[Note]
·Line height is independent under standard and page mode
[Reference]
ESC 3
ESC 3 n
[Name]
Setting the height of the line
[Format]
ASCII
ESC
3
n
Hex
1B
33
n
Decimal
27
51
n
[Range]
0 ≤ n ≤ 255
[Note]
Setting[n*units of vertical or lateral shifting]inches as the height of the line
[Note]
·Setting[n*units of vertical or lateral shifting]inches as the height of the line
·Units of vertical or lateral shifting are set by GSP,changing this setting will not
influences current height of line
·Using vertical shifting units under standard mode
·According to the direction of printing area and the beginning position to select
lateral or vertical shifting units under page mode.The selection modes are as
below:
①
Using vertical shifting when the beginning position is the top left or lower right
corner of the printing area which is set by ESC T;
②
Using lateral shifting when the beginning position is the lower left or top right
corner of the printing area which is set by ESC T;
·The maximum distance of feeding paper is 1016mm(40inches).If it is beyond this
distance, taking the maximum distance.
[Default value]
The default height of line is 4mm(about1/6inch)
[Reference]
ESC 2, GS P
ESC = n
[Name]
Selecting printer
[Format]
ASCII
ESC
=
n
Hex
1B
3D
n
Decimal
27
61
n
[Range]
0≤ n ≤ 1
[Description]
Selecting printer, the printer selected can receive the data sent by main
