13
interface type, default value of printer parameters, 96 ANK characters in ASCII
code, content of default code page (if language is set English) or name of
Chinese character library (if the language is set Chinese), bar code type, at
last four lines black and white alternating icon.
Self-test method: Keep pressing FEED button and power on the printer, then
release POWER button after hearing buzzer reminding sound, then release
FEED button, at this time the printer will print self-test receipt.
2.8 Hexadecimal Printing
Turn on the printer according to the step below, it will enter the mode of
Hexadecimal Printing
1.Open the cover;
2.Hold down
【
POWER
】
button to turn on the printer
3.Close the cover, the printer will print out 3 lines as below:
Hexadecimal Dump
To terminate hexadecimal dump,
Press FEED button three times.
This means the printer has entered hexadecimal printing mode, and under this
mode,all of the input will be printed out as hexadecimal number. Paper will
feed one line with single press of “FEED” button, after 3 times, it will print out
“*** Completed ***”, and exit hexadecimal printing mode.
2.9 Printer parameter settings
This function is to setup some simple parameters.
Method to enter parameters setting mode:
Under power off states, open paper cover firstly, keep pressing FEED
button and power on the printer, then release FEED button after hearing
buzzer remind sound. Then press FEED button for two times, and close paper
