09
08
Quick Start Guide
Quick Start Guide
03.
03.
• Push the MENU button to get to the VIDEO menu.
• Use the DOWN button to highlight the setting
named Loop Recording and push OK.
• Use the UP and DOWN buttons to highlight the
required video length (The OFF setting will record
the longest possible loops keeping the file size
under 2GB, which is around 7 minutes at 1080p).
• To confirm selection, push the OK button,
the 1080p Dash Camera will take you back to the
VIDEO menu.
Set G-Sensor:
The G-Sensor monitors any unnatural bumps or
impacts and logs the associated footage as Locked,
ensuring any footage of potential crashes is not
recorded over with the regular loop footage.
To set the G-Sensor follow the directions below.
• Use the MODE button to make sure you are in
VIDEO mode (Video camera icon will be displayed
in the top left corner of the screen).
• Ensure you are not currently recording. If the red
circle record indicator is flashing at the top left of
the screen, push the OK button to stop recording.
• Push the MENU button to get to the VIDEO menu.
• Use the DOWN button to highlight the setting
named G-Sensor and push OK.
• Using the UP and DOWN button, highlight the
required sensitivity of the G-Sensor (2G is the most
sensitive setting only requiring small bumps to log
footage as Locked, and 8G is the least sensitive
requiring a larger amount of activity to log footage
as Locked).
• To confirm selection, push the OK button,
the 1080p Dash Camera will take you back to the
VIDEO menu.
Set Motion Detection:
Motion Detection monitors on screen movement and
will start recording when movement is detected.
Motion Detection will also stop recording after 10
seconds of no on screen movement.
To set up Motion Detection on your 1080p Dash
Camera follow the directions below.
• Use the MODE button to make sure you are in
VIDEO mode (video camera icon will be displayed
in the top left corner of the screen).
• Ensure you are not currently recording. If the red
circle record indicator is flashing at the top left of
the 1080p Dash Camera’s screen, push the OK
button to stop recording.
• Push the MENU button to get to the VIDEO menu.
• Using the DOWN button highlight the setting
named Motion Detection and push OK.
• Use the UP and DOWN buttons to highlight
either OFF or ON.
• To confirm selection, push the OK button,
the 1080p Dash Camera will take you back to the
VIDEO menu.