Sprint Ride-Fi, User Manual, Page: 74 / 78

71
Regulatory Information
The following topics provide important regulatory information.
Specific Absorption Rates (SAR)
forWireless
Device
The SAR value corresponds to the relative amountof RF energy absorbed into the head of a user of
awireless device.
The SAR value of a device is the result of anextensive testing, measuring and calculationprocess. It does
not represent how much RF thedevice emits. All device models are tested attheir highest value in strict
laboratory settings.But when in operation, the SAR of a device canbe substantially less than the level
reported tothe FCC. This is because of a variety of factorsincluding its proximity to a base station
antenna,device design and other factors. What is importantto remember is that each device meets
strictfederal guidelines. Variations in SARs do notrepresent a variation in safety.
All devices must meet the federal standard, whichincorporates a substantial margin of safety. Asstated
above, variations in SAR values betweendifferent model devices do not mean variationsin safety. SAR
values at or below the federalstandard of 1.6 W/kg are considered safe for useby the public.
The highest reported SAR values of the Ride-Fi are:
Simultaneous : 1.483W/Kg
Body-worn: 1.349W/Kg
For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when
used with an accessory that contains no metal and that positions the handset a minimum of 20 cm from
the user’s body.
FCC Radio Frequency Emission
This device meets the FCC Radio FrequencyEmission Guidelines.
FCC ID number: 2ACCJB028
More information on the device’s SAR can befound from the following FCC website: