Quick Start Guide
AIRAVE 4 LTE
Setup Instructions
Install your AIRAVE 4 LTE
Check that all these components are in the box:
NOTE: You will also need
a working electrical outlet
1.
Turn the unit to expose the back of the unit.
2.
Connect one end of the Ethernet cable to an available LAN port on your
broadband connection modem, or to a LAN port on your network. If on network:
• Open UDP ports 53, 67, 500 and 4500 bi-directionally
• Contact your IT administrator for assistance
3.
Place the other end of the Ethernet cable to the Airave 4 Ethernet port.
4.
Connect the external GPS antenna to the GPS connection, under the cap.
5.
Plug the power supply cable into the DC port on the back.
6.
Place the GPS antenna base on a flat surface next to a closed window.
7.
Plug the other end of the power supply into an available electrical outlet.
(We recommend a surge protected outlet)
Place the Unit
In an elevated location, such as the top of a shelf or tall cabinet
Within 10 to 20 feet of a clear view of the sky
Within reach of your broadband modem or router
Within reach of an electrical outlet
Turn the unit so the front faces into the room and carefully move all
cables.
NOTE: There is room for the cables to come from the sides of the unit once it is
facing forward.
AIRAVE 4 LTE
