MATRIX
®
430VF
GUID
ANCE
JOB D
AT
A
INTR
ODUC
TION
CONSOLE
19
98-05351-EN R1
CONFIGUR
ATION
Field Configuration
Field configuration menu is used to create and manage up
to five (5) individual field profiles representing the
configuration of a particular field setup. Each field profile records
the settings in use at the time the profile is generated allowing the
customer to recall their exact setup for later use.
1. From the Home screen, press CONFIGURATION button
.
2. Press FIELD CONFIGURATION button
.
3.
Configure each option in the following order. Press current value
then use the keyboard to enter a new value or select an option
from the list provided.
X
Field Profile Number
– use to select one of five (5) field
profiles. The profile that is “active” is displayed/active on the
operation screen.
X
Row Spacing
– used to enter the spacing between each
row. Range is 0.1 to 32.8 feet / 0.03 to 10.00 metres.
X
Canopy Width
– used to enter the width of the canopy.
Range is 0.1 to 78.7 feet / 0.03 to 24.00 metres.
X
Number of Rows
– used to select the number of rows to
next guideline. Range is 1 to 100.
33
22
55
11
44
Field Indicators on Guidance Screen
On the guidance screen, the rows and canopies are illustrated
using the configurations set in the current field profile in
combination with an established AB guideline. If no guideline is
established, canopy indication will not be shown on the vehicle
view guidance screen.
W
Canopies are green rows parallel to the guideline
W
Ground between canopies is brown.
NOTE: If canopy width is greater than or equal to the row
spacing, no ground colour will be seen on the guidance
screens.
Guidance Width
Guidance width is calculated by the number of rows multiplied
by the row spacing. The guidance width is used to deterines the
adjacent guidelines on the guidance screen.
