MATRIX
®
430VF
GUID
ANCE
JOB D
AT
A
INTR
ODUC
TION
CONSOLE
17
98-05351-EN R1
CONFIGUR
ATION
33
22
55
11
44
Working Width
The total width for all sections is used to determine the working
width. The working width is used to determine the automatic finish
point of a boundary.
Machine Types
Each type of machine has unique options to indicate how the
vehicle will be displayed in relation to the rows and canopy on the
Guidance screen
Mounted and Trailed Airblast
The vehicle is located between rows and does not have a boom.
Only 2 sections will be available. The guideline is centered
between rows.
When configuring a machine that only sprays to one side, define
one section as 0.00 ft / 0.00 m. Sections are measured from the
middle of the sprayer; therefore, applied area will be to one side
only (left or right).
