SPORTSTECH ESX600, User Manual

Page: 48 / 150

48
For the colour of your display light, you can choose from
different options
. Select the desired option with
the 'Colour mode' button and the arrow buttons. (The actual colours may differ from the description.) In
standby, the colour red is shown.
1. PERFORMANCE BASED COLOURS: from WATTS or PULSE RATE
In this mode, the computer automatically sets the display colour according to your performance.
This mode is the default setting after you have switched your device on.
To return to this mode from constant colour, select colour code '
C00 ', as described in paragraph 2.
• When the computer receives no pulse signal, it measures your current power in
WATTS
(W)
and sets the display coulour accordingly.
0-100 W 101-150 W 151-200 W 201-250 W 251-300 W 301-350 W > 350 W
Blue Aqua Green Yellow Orange Red Purple
• As soon as the computer receives a pulse signal from the sensors in the sensor bracket or from
an external sensor, it sets the coulour depending on your
PULSE RATE
.
In
HrC
mode, the
target pulse
you have set is taken as
MHR
(= Max. heart rate =
100%
). The
display colour depends on which percentage of the MHR your current pulse makes.
(Example: Target pulse = MHR = 160
BPM
. Current pulse = 120
BPM
= 75% of MHR => Colour is orange.)
< 50%
MHR
50-57%
MHR
58-65%
MHR
66-73%
MHR
74-81%
MHR
82-89%
MHR
≥
90%
MHR
Blue Aqua Green Yellow Orange Red Purple
In
other
training modes, your pulse determines the display colour as follows:
< 110
BPM
110-126
BPM
127-144
BPM
145-161
BPM
162-179
BPM
180-196
BPM
≥
197
BPM
Blue Aqua Green Yellow Orange Red Purple
2. CONSTANT COLOUR
You can set a
constant colour
:
• Press 'Colour mode' button in stand-by mode for 3 seconds until 'C00' appears on the display.
• Select the desired colour code with the 'UP'/'DOWN' buttons according to the following table.
When the desired colour is displayed, press the 'Colour mode' button again for three seconds.
The display then returns to stand-by mode.
C00 C01 C02 C03 C04 C05 C06 C07
(automatic)
Blue Aqua Green Yellow Orange Red Purple
3. LIGHTS OFF
You can switch off the display illumination and train without any visual effects.
• To switch off the display light, press the 'Colour mode' button during your workout .
• To switch it back on, press the button again.
NOTE: After five minutes of user's inactivity, the illumination is switched off automatically, even
when the training is still active.
DISPLAY COLOUR MODES