2
1-800-732-0144
Prepare the Collar Receiver
Your Collar Receiver comes with short Contact Points installed. Use the long
Contact Points for pets with long or thick hair. Tighten the Contact Points with
pliers one-half turn beyond finger tight (
A
). Check the tightness weekly.
To Insert and Remove the Battery
Note: Do not install the battery while the Collar Receiver is on your pet.
1. Remove the screws with a Philips screwdriver.
2. Remove the Battery Lid (
B
).
3. Install a 9-volt alkaline battery (
C
).
4. Replace the Battery Lid (
C
).
5. Reinstall the screws. Do not over-tighten the screws.
Replacement 9-volt alkaline batteries can be found at many retailers.